Famco Crown Repair Nationwide

Famco Crown Repair: The Kennesaw Owner’s Guide

Famco crown repair in Kennesaw typically runs $340-$680 installed, depending on crown size and flue count, and we stock Famco-compatible materials on every truck. Most Kennesaw homeowners discover the issue during pre-burning-season inspections or after water stains appear on the ceiling near the fireplace. We write it down before we ask you to decide anything - a written price, written scope, and camera documentation of the damage before any work starts.

Call (678) 535-2204

Which Famco Models This Applies To

Famco crowns are found across several product generations, and matching the right repair kit matters. The most common in Kennesaw homes are the Famco FC-series pre-fab crowns from the early 2000s and the later Famco Pro-Vent line with integrated drip edges. Check the metal tag on the crown skirt or the stamped model number on the flue collar - FC-8, FC-10, FC-12, and PV-8 through PV-14 are the ones we see most often around Kennesaw Mountain and the older subdivisions off Wade Green Road.

The FC-series used a thinner-gauge galvanized skirt that tends to rust through at the weld seams after 12-15 years in Georgia’s humidity cycles. The Pro-Vent line upgraded to a heavier galvanized or stainless option, but the cast-concrete top is still prone to the same freeze-thaw cracking every crown suffers. We source Famco-spec materials through Haven’s buying network, including DuraFlex and Gelco equivalents when the OEM part is back-ordered or discontinued. For most Kennesaw homeowners, the aftermarket crown repair kit matches spec at a lower parts cost, with the same 10-year material warranty.

If your crown has no visible tag, measure the flue opening width and the overall crown footprint. An FC-10 and a PV-10 both cover a 10-inch flue, but the skirt depth and fastener pattern differ. Bring us those two numbers and a phone photo, and we’ll confirm compatibility before we schedule.

Signs Your Famco Crown Repair Is Failing

• Water stains on the ceiling near the chimney breast. The crown’s concrete top has cracked or the metal skirt has separated at the seam, letting runoff follow the flue tile down into the attic space. In Kennesaw’s spring storm season, a single compromised seam can funnel gallons into the chase.
• Spalling or flaking on the crown surface. The concrete top is shedding its outer layer, exposing the aggregate beneath. This happens faster on south-facing crowns in Kennesaw, where daily thermal cycling stresses the concrete through summer heat and winter freeze.
• Rust streaks down the chimney chase or siding. The galvanized skirt on older FC-series crowns has corroded through at the weld or fastener points. Once rust reaches the interior face, it accelerates from the inside out, and the skirt loses its structural grip on the flue.
• Visible gap between crown and flue tile. The crown has settled or the original sealant has failed, creating a direct path for water and vermin. We’ve pulled squirrel nests and wasp colonies from this gap in Kennesaw homes near Swift-Cantrell Park - the gap looks small from the roof, but it’s wide open from above.
• Damp or musty smell from the fireplace after rain. Water is entering the flue system through crown damage, saturating the smoke chamber and firebox masonry. The smell means the water has found a path all the way down, and the freeze-thaw damage to interior flue tiles has likely already started.

Before

After

Replacement Cost & What’s Included

The range depends on three things: crown size and flue count, roof pitch and access difficulty, and whether the chase cover or flue tile needs work while we’re there. Every quote is itemized in writing before scheduling - parts, labor, warranty terms, and what happens if we find additional damage during the camera inspection. The 365-Day Done Right Promise applies to crown work same as everything else: if the repair leaks or fails, we make it right. Materials carry their manufacturer’s warranty, and our labor is documented under Haven Standard Clause 4 with dated photo records.

DIY or Call Us?

Here’s what you can safely check yourself: from the ground, use binoculars to look for cracks, rust streaks, or missing chunks on the crown surface. Inside, shine a flashlight up the firebox and look for water marks on the smoke chamber walls or flue tiles. That’s the limit of what we’d recommend.

Crown repair involves working at roof height on a sloped surface, often near a 200-degree flue outlet. The concrete mix must be troweled to the correct slope and overhang, and the skirt must be sealed with high-temp silicone rated for chimney use - standard caulk fails in months. More importantly, a crown repair without a camera inspection of the flue beneath it is guesswork. We’ve replaced crowns on Kennesaw homes where the real problem was a cracked flue liner three feet down, invisible from the roof. The new crown leaked again in six months because the source was never found.

We’re not affiliated with Famco - we’re an independent service provider - and we don’t sell parts for owner installation. What we do is inspect, document, quote in writing, and install with a warranty you can hold. Call (678) 535-2204 when you’re ready to see what you’re actually dealing with.

FAQs