Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Kennesaw: What to Know First

We provide independent Famco chimney cap and crown service in Kennesaw with a written price before any work starts and a camera-scan photo record on every job. Most Famco cap replacements and crown repairs are completed in a single visit, and we carry common Famco hardware in our Kennesaw warehouse to avoid ordering delays. You’ll see exactly what we found, what it costs, and what your warranty covers before anyone touches your chimney.

Call (678) 535-2204

This page is for homeowners who already have a Famco cap or crown installed and need honest answers about what’s failing, what it’ll take to fix it, and what the bill looks like. If you’re in Kennesaw, Acworth, or the neighborhoods around Kennesaw Mountain National Battlefield Park, you’re in our service area. Call us at (678) 535-2204 for a free estimate.

How Famco Products Fail - and How We Fix Them

• Famco stainless single-flue caps (Model 75 and 100 series): The spot-welded seams on these caps crack at the corners after 7-10 years in Kennesaw’s cycle of humid summers and freeze-thaw winters. Water wicks through the seam, rusts the mesh from the inside out, and the cap starts shedding pieces onto the roof. We remove the failed cap, inspect the flue tile for spalling damage underneath, and install a replacement with fully seam-welded construction or a one-piece stamped lid that eliminates the failure point entirely.
• Famco galvanized multi-flue caps: The factory powder coat on galvanized Famco caps chalks and flakes faster than their stainless counterparts, especially on south-facing chimneys in Kennesaw where UV exposure is highest. Once the coating fails, the underlying steel rusts through in 3-5 years. We don’t recommend re-coating; the labor exceeds the value. We replace with a stainless or copper multi-flue cap sized to your chimney’s exact outside dimensions, not the closest stock size.
• Famco draft-inducing caps (WindBeater series): The rotating turbine bearings seize after prolonged exposure to pine pollen and Georgia red clay dust, which Kennesaw gets in abundance each spring. A seized WindBeater actually restricts draft instead of improving it. We disassemble the turbine, assess whether the bearing housing is salvageable, and quote both a rebuild and a replacement. Most owners choose replacement after seeing the internal corrosion on our camera feed.
• Famco chimney crowns (poured concrete and pre-formed): Famco’s pre-formed crown units sometimes ship with insufficient sidewall thickness for chimneys over 30 inches wide. The center sags, pools water, and cracks through within two seasons. We don’t install thin pre-forms on wide flues; we either pour a new concrete crown with proper slope and drip edge, or we apply a cast-in-place crown coating system if the structural concrete underneath is sound.
• Famco cap-to-flue attachment hardware: The standard leg bolts on Famco caps loosen in Kennesaw’s frequent thermal expansion cycles, especially on chimneys serving wood stoves that run hot-cold-hot daily. A loose cap shifts in wind, scores the flue tile, and eventually blows off entirely. We upgrade to stainless steel expansion anchors with nylon lock nuts, and we torque them to spec instead of hand-tightening.

Our Famco Chimney Cap & Crown Process

1. 1
   Book the inspection. Call (678) 535-2204 and we’ll schedule a Level 2 camera inspection. You’ll get a text when your tech is en route, with their name and photo.
2. 2
   Diagnose with documentation. We run a chimney camera down the flue, photograph the crown from the roof and the ladder, and check cap fit and fastener condition. You see the images on a tablet before we leave the roof. Corrine Halstead’s rule: we write it down before we ask you to decide anything.
3. 3
   Quote in writing. We deliver a written scope, written price, and written warranty before any work is scheduled. Clause 1 of the Haven Standard requires it. No verbal estimates that change when the truck arrives.
4. 4
   Source the right parts. For Famco caps, we check OEM availability against our quality aftermarket options from Gelco and Olympia Chimney. We explain the trade-off - warranty coverage, gauge of metal, mesh spacing - and you choose. We procure through Haven’s buying network to keep the price honest.
5. 5
   Execute and test. We install or repair, torque every fastener to spec, run a final camera pass to confirm no debris entered the flue, and perform a smoke-pencil draft test on the new cap.
6. 6
   Deliver your record. Clause 4 of the Haven Standard requires a documented photo record on every job. You get camera stills, a written invoice with warranty terms, and our 365-Day Done Right Promise in writing.

Before

After

What Famco Chimney Cap & Crown Costs in Kennesaw

Every estimate is free. We don’t charge to climb your roof and tell you what’s wrong. If you have a competitor’s written quote, we’ll give you a free second opinion with our own camera documentation.

Why Kennesaw Homeowners Call Level Two Chimney Kennesaw for Famco Work

We’ve inspected over 38,000 chimneys since 2009, and we’ve seen enough Famco products to know where the factory got it right and where corners show up after a few Kennesaw winters. Our techs carry Famco-compatible hardware plus backup inventory from DuraFlex, HeatShield, and Gelco, so you’re not waiting on a single-source part that may be backordered.

The Haven Standard governs everything we do. Background-checked, uniformed technicians. License number on every page. A written price before work starts, every time, no exceptions. And if something’s not done right, we make it right - that’s the 365-Day Done Right Promise, stamped on every job.

Calls are answered by a live person, 24 hours a day, 7 days a week. Not a voicemail. Not a web form that disappears into someone’s inbox.

FAQs