Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Repair for Kennesaw Homeowners
Chimney repair in Kennesaw typically costs $350 for minor mortar repointing up to $4,500 for partial rebuilding, with most jobs completed in one to three days. Level Two Chimney Kennesaw has completed more than 38,000 chimney inspections and cleanings since 2009, and every repair starts with a camera-scan inspection and a written price before any work begins. Call us at (678) 535-2204 for a free estimate with no obligation.
Kennesaw’s clay-heavy soil and freeze-thaw cycles from January through March do real damage to chimney masonry. We’ve repointed flues in Barrett Greene, rebuilt crowns in Legacy Park, and waterproofed stacks throughout Kennesaw’s historic districts where homes from the 1980s and 1990s are showing their age, all as part of our Chimney Repair in Kennesaw. Our technicians are background-checked, uniformed, and licensed, and you’ll get a text when yours is on the way. Every repair is backed by our 365-Day Done Right Promise and documented with photos under Haven Standard Clause 4.
What Our Chimney Repair Service Includes
Mortar Repointing
Mortar repointing is the process of grinding out deteriorated mortar between bricks and packing fresh, matched mortar into the joints. In Kennesaw, we see accelerated mortar decay in homes near Kennesaw Mountain where wind-driven rain saturates the stack, and in neighborhoods like Town Center Estates where original construction used lower-grade mortar mixes. We match the new mortar’s compressive strength and color to the existing joint profile, and we document the depth of grind and repoint coverage with photos before we seal the job. Most repointing jobs on a standard Kennesaw chimney run $350-$850.
Spalling Brick Repair
Spalling brick repair addresses what happens when water trapped inside brick freezes, expands, and pops the face off the brick, leaving a crumbly, porous surface. Kennesaw’s red clay soil holds moisture against foundations and chimney bases, and north-facing stacks in communities like McCollum Woods never fully dry out through winter. We remove spalled bricks to sound substrate, source matching replacements through our Haven buying network, and rebuild the affected courses with proper weep holes and drainage. A typical spalling repair on a Kennesaw chimney runs $600-$1,800 depending on how many courses are affected.
Chimney Waterproofing
Chimney waterproofing is the application of a vapor-permeable silane/siloxane sealant to the exterior masonry, which blocks liquid water from entering while allowing trapped moisture to escape. Kennesaw’s annual rainfall of roughly 52 inches, combined with the humid subtropical climate, means unsealed chimneys absorb water year-round. We apply Chimney Repair in Kennesaw waterproofing treatments from Olympia Chimney and Famco after any masonry repair is complete, and we include a written five-year performance warranty. A standard waterproofing treatment for a Kennesaw chimney runs $400-$700.
Flashing Repair
Flashing is the sheet metal barrier where the chimney penetrates the roof plane, and it’s the single most common leak point we find in Kennesaw homes. The expansion and contraction of asphalt shingles against rigid metal, combined with the thermal cycling of Georgia summers, separates flashing seams over time. We remove the compromised flashing, inspect the roof deck and chimney shoulder for hidden rot, and install new step flashing and counterflashing with proper overlap and sealant. Most flashing repairs in Kennesaw run $450-$1,200, with copper upgrades available through our Copperfield supply line.
Chimney Rebuilding
Chimney rebuilding is partial or complete demolition and reconstruction of the masonry stack, typically required when structural integrity is compromised by widespread spalling, settled foundations, or lightning strike damage. In Kennesaw, we’ve rebuilt chimneys in older subdivisions like Hickory Flat and along Bells Ferry Road where original construction predates modern seismic and wind-load codes. We salvage reusable brick when possible, source matching new brick through our network, and rebuild to current code with proper footings, flue liners, and crown overhangs. Partial rebuilds start around $2,500; full rebuilds on a standard Kennesaw home typically run $4,000-$8,500.
Tuckpointing
Tuckpointing is a specialized form of repointing where two contrasting mortar colors are used to create the illusion of finely cut joints, common in historic and high-end Kennesaw homes. The technique requires grinding to a precise depth and applying a base mortar that matches the brick, then a thin strip of contrasting mortar to form the visible joint line. We’ve tuckpointed chimneys in Kennesaw’s designated historic areas and in custom builds throughout Cobb County where architectural review boards require period-appropriate repair. Tuckpointing runs $8-$15 per square foot of joint surface in the Kennesaw market.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Repair
We specify repair materials from manufacturers we’ve worked with long enough to trust their performance in Georgia’s climate. Our Gelco caps and chase covers have held up through fifteen Kennesaw winters without galvanic corrosion, and we keep common sizes in stock for same-day installation when a storm-damaged cap needs immediate replacement. Olympia Chimney’s stainless steel liner systems are our default for Kennesaw relining jobs where clay flue tiles have cracked from thermal shock or chimney fires. We source through Haven’s buying network specifically to keep customer prices honest, and every material carries a manufacturer’s warranty plus our 365-Day Done Right Promise.
We also work with Famco dampers and termination caps, and Copperfield copper flashing and custom metalwork for Kennesaw homes where longevity and appearance justify the premium. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make installed, we can inspect it, repair it, or replace it with documented photo evidence of the condition we found. Our technicians carry license numbers and are assigned by name, not dispatched anonymously.
Before
AfterSigns You Need Chimney Repair Right Now
- White efflorescence on brick faces. That chalky white deposit is mineral salt left behind when water moves through masonry and evaporates. It means water is getting in, dissolving mortar compounds, and carrying them to the surface. In Kennesaw’s humid climate, efflorescence rarely appears without accompanying internal damage.
- Cracked or missing mortar joints. Open joints create a direct path for water into the wall cavity and accelerate freeze-thaw damage every winter. We find this most often on Kennesaw chimneys that haven’t been inspected in five or more years, particularly on homes in shaded lots where moss holds moisture against the brick.
- Loose or spalling brick faces. Once the hard outer face pops off, the porous inner brick absorbs water like a sponge. Spalling spreads fast in Kennesaw’s climate, and a single affected brick can compromise the structural course above it within two to three freeze-thaw cycles.
- Rust stains on the chimney exterior or hearth. Rust means metal inside the chimney, flue, or firebox is corroding from moisture intrusion. In Kennesaw, we trace rust stains to failed chimney caps, deteriorated crown wash, or condensation from improperly sized flue liners, and the underlying damage is often worse than the stain suggests.
- Water stains on ceiling drywall near the chimney. This is active leakage, not old damage, and it means the flashing, crown, or masonry has failed to the point of interior penetration. In Kennesaw’s summer thunderstorm pattern, a small leak can saturate insulation and create mold conditions within 48 hours of heavy rain.
Our Chimney Repair Process - Step by Step
- 1
Schedule your inspection. Call (678) 535-2204 and speak to a live person, any time of day. We’ll book a two-hour arrival window that works with your schedule, assign a named technician, and text you when they’re en route to your Kennesaw home.
- 2
Camera-scan inspection and documentation. Your technician performs an NFPA 211 Level 2 inspection, running a high-resolution camera the full length of the flue to document liner condition, creosote buildup, and any obstructions or damage. We also photograph the exterior masonry, crown, cap, and flashing from roof level. This is Haven Standard Clause 4, and we’ve done it on every job since 2009.
- 3
Written diagnosis and price. We show you the camera footage and photos, explain what we found in plain terms, and deliver a written scope of work with a fixed price before any repair begins. No verbal estimates, no “we’ll see once we start,” no pressure. Haven Standard Clause 1 requires it in writing.
- 4
Repair with documented progress. Your technician completes the agreed scope using materials from our Haven buying network. We photograph key stages, moisture readings, and final conditions. If we find concealed damage that changes the scope, we stop, show you, and get written approval before continuing.
- 5
Final documentation and warranty. You receive a complete photo record, written warranty, and invoice with the 365-Day Done Right Promise clearly stated. We archive your documentation for future reference, and our live support line remains open if questions arise after we leave.
How Much Does Chimney Repair Cost in Kennesaw?
A typical mortar repointing job in Kennesaw runs $350-$850. Spalling brick repair runs $600-$1,800. Chimney waterproofing runs $400-$700. Flashing repair runs $450-$1,200. Partial chimney rebuilding starts around $2,500, with full rebuilds on standard homes running $4,000-$8,500. Tuckpointing for historic or custom homes runs $8-$15 per square foot of joint surface.
Several factors move the price within these ranges. Height and roof pitch affect labor time and safety equipment needs. Two-story Kennesaw homes with steep pitches in neighborhoods like Legacy Park cost more to access than single-story ranches on level lots. The extent of hidden damage, which we document with camera and photo evidence, can expand scope if structural courses are compromised. Material matching also matters. Salvaging original brick or sourcing period-appropriate replacements for Kennesaw’s older homes takes more time than standard new brick.
To avoid overpaying, get any competitor’s estimate in writing and bring it to us for a free second opinion. We’ll inspect the chimney ourselves, show you our camera footage, and explain where their scope is accurate, inflated, or incomplete. We’ve found estimates in Kennesaw that recommended full rebuilds for problems that repointing would solve, and we’ve found others that missed cracked flue liners behind sound-looking brick. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait.
Every free estimate includes the NFPA 211 Level 2 inspection, full camera-scan documentation, and written price with no obligation to book. Call (678) 535-2204 to schedule.
Chimney Repair Near Kennesaw - Our Service Area
Level Two Chimney Kennesaw serves homeowners throughout Cobb County and into adjacent Cherokee and Paulding counties. We regularly repair chimneys in Chimney Repair in Acworth, Chimney Repair in Marietta, Woodstock, Fair Oaks, Holly Springs, Dallas, Roswell, Sandy Springs, Canton, Dunwoody, and Milton. Most Kennesaw-area appointments are available within three to five business days, with emergency leak response prioritized during active weather. Our technicians live in the communities they serve, which means they understand the local soil conditions, building stock, and permit requirements that affect repair scope and timeline.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Repair in Kennesaw
Chimney repair is the restoration of damaged masonry, metal, or waterproofing components that protect the flue and structure from water, fire, and structural failure. In Kennesaw, this most commonly involves repointing deteriorated mortar, replacing spalled brick, rebuilding compromised crowns, repairing or replacing flashing, and applying vapor-permeable waterproofing to prevent future damage. Every repair we perform starts with a camera-scan inspection so you see the condition we found before any work is proposed. Call (678) 535-2204 for a free estimate.
Most chimney repairs in Kennesaw are completed in one to three days, with simple repointing or cap replacement often finished in a single visit. Rebuilding projects, historic tuckpointing, or jobs requiring custom material orders may extend to five days. We give you a specific timeline in writing before work starts, and we don’t leave your job site to chase other work. Weather can delay exterior masonry work in Kennesaw’s thunderstorm season, and we’ll communicate any schedule changes by text or call.
If you’re wondering how much Chimney Repair costs in Kennesaw, prices range from $350 for minor repointing to $8,500 for full rebuilding, with most homeowners spending $600-$2,500 on their project. The specific price depends on access difficulty, extent of hidden damage, material matching requirements, and whether the flue liner needs concurrent repair. We deliver a written, fixed price after inspection, not a range that expands later. For an exact quote on your chimney, call (678) 535-2204 - estimates are free and include full camera documentation.
Yes. We install and repair Gelco caps, chase covers, and accessories, and we specify Olympia Chimney stainless steel liner systems for Kennesaw relining jobs. Both brands are sourced through our Haven buying network to keep pricing honest, and we stock common Gelco cap sizes for same-day replacement when storm damage occurs. If your chimney has another brand installed, we inspect and repair those as well with equal documentation standards.
We prioritize active leak calls and storm damage during business hours, and our live phone support is available 24 hours a day, 7 days a week to assess urgency and schedule response. We do not promise same-day dispatch for non-emergency repairs, but we will tell you honestly whether your situation requires immediate attention or can be safely managed with temporary measures until scheduled repair. Active water intrusion, structural instability, or post-lightning-strike damage typically qualifies for priority response in Kennesaw.
Every chimney repair is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. This is stamped on every job under the Haven Standard. Waterproofing treatments carry a separate five-year performance warranty. Manufacturer warranties on materials like Olympia Chimney liners or Gelco caps run concurrent with our workmanship guarantee. We document warranty terms in writing at job completion, and our live support line handles any claim directly without routing you through a call center.
Clear a path from your driveway to the chimney area, move vehicles from the driveway to allow material delivery and debris removal, and secure pets in a separate room from the work zone. We bring our own drop cloths, HEPA vacuums, and protective sheeting for interior access if needed. For Kennesaw homes with steep roofs or limited yard access, we may ask you to trim overhanging branches before arrival. We’ll communicate any specific preparation needs when we confirm your appointment.
Schedule Your Chimney Repair Service in Kennesaw Today
Call (678) 535-2204 to speak with a live person and schedule your free chimney inspection. You’ll get a named technician, a written price before any work starts, camera documentation of everything we find, and the 365-Day Done Right Promise on every repair. We’re independently owned and operated under the Haven Standard, and we’ve documented every one of our 38,000-plus jobs since 2009. No obligation, no pressure, no surprises.
Written by Corrine Halstead, Owner at Level Two Chimney Kennesaw, serving Kennesaw and surrounding communities since 2009.