Famco Fireplace Services Nationwide

Famco Fireplace Services in Kennesaw: What to Know First

We provide independent Famco fireplace services in Kennesaw, from gas valve troubleshooting to firebox rebuilds, with a written price before any work starts and a camera-scan inspection included on every visit. Most Famco jobs are completed in a single appointment once parts are confirmed, and we carry common Famco-compatible components for the FMI and Vantage Hearth lines we see most often around Kennesaw. If you own a Famco gas fireplace, wood burning unit, or insert and need service, repair, or conversion work, call us at (678) 535-2204. We write it down before we ask you to decide anything.

Call (678) 535-2204

How Famco Products Fail - and How We Fix Them

• FMI B-Vent gas fireplaces - intermittent pilot failure. The SIT 820 Nova millivolt valve in early FMI B-Vent units (common in Kennesaw’s 2015-2019 builds near Chastain Meadows) loses thermopile output after 4-6 seasons of Georgia humidity cycling. The pilot stays lit but won’t signal the main valve. We test millivolt output at the valve, replace with an OEM SIT or a Robertshaw equivalent rated for the same manifold pressure, and clock the gas meter to confirm input rate matches the Famco nameplate.
• Vantage Hearth direct-vent inserts - blower motor bearing seize. The FASCO-style blowers in VH Series inserts run almost continuously in Kennesaw’s shoulder seasons, and the sleeve bearings dry out before the motor itself fails. We pull the blower assembly, check the Famco-specified CFM rating on the data tag, and source either the OEM FASCO or a Mars replacement with identical static pressure curves. A mismatched blower overfires the box or undercirculates heat into the room.
• Famco wood burning fireboxes - refractory panel cracking at the throat. The 36-inch and 42-inch models shipped with pressed-mullite panels that spider-web from thermal shock when homeowners burn unseasoned oak (abundant and cheap in Cobb County). We measure the crack width and location per NFPA 211; hairline cracks away from the throat get monitored, but cracks penetrating the panel thickness or opening into the smoke chamber require replacement with HeatShield-compatible refractory or a full steel firebox insert depending on clearance.
• Famco gas log sets - ember bed degradation and sooting. The ceramic fiber ember beds in FMI’s vented log sets break down after repeated Kennesaw summer humidity, shedding particles that clog the burner ports. The flame pattern goes yellow and lazy, and homeowners assume the gas pressure dropped. We pull the logs, photograph the burner orifice condition, and either clean and reseat with new ember material or replace the burner pan if the ports are eroded. We never clean gas burner ports with a wire brush - it enlarges the orifice and overfires the set.
• Famco chimney-top dampers - cable housing corrosion. The cable-operated top-sealing dampers on FMI wood burning units use a galvanized housing that rusts at the bend where it exits the flue tile in Kennesaw’s acidic clay soil environment. The cable binds, the damper hangs half-open, and conditioned air escapes year-round. We inspect with a chimney camera to confirm flue tile integrity, then replace with a Gelco stainless cable housing or convert to a Lyemance-style damper if the tile lip is damaged. We document the flue condition before and after - Clause 4 of the Haven Standard requires the photo record.

Our Famco Fireplace Services Process

1. 1
   Call and schedule. A live person answers, checks Famco model availability in our parts cross-reference, and books a window. You get a text when your tech is en route.
2. 2
   Camera-scan inspection. We run the chimney camera on every Famco job - gas or wood - to document flue liner condition, clearance to combustibles, and any defect that would affect the repair plan. You see what we see on the tablet.
3. 3
   Written price and scope. Corrine Halstead’s standing rule: we name the parts, the labor, and the warranty in writing before work starts. No verbal estimates. If we find additional issues during the repair, we stop and get approval.
4. 4
   Parts decision. We stock common Famco-compatible valves, blowers, and refractory. For obsolete FMI parts, we source through our Haven buying network from Olympia Chimney or Copperfield, or fabricate a documented equivalent that maintains safety clearances.
5. 5
   Repair and test. We clock gas input rates, verify draft with a manometer on wood units, and run a full burn cycle. The tech signs off; you get the photo record and the written warranty before we pack up.
6. 6
   365-Day Done Right Promise. If the Famco unit doesn’t perform as specified in our written scope, we return and make it right. That’s stamped on every job under the Haven Standard.

Before

After

What Famco Fireplace Services Costs in Kennesaw

These are real Kennesaw market ranges for Famco-specific work, not teaser rates. Every estimate is free, and we honor our Free Second Opinion on any competitor’s written quote. Call (678) 535-2204 for your exact price.

Why Kennesaw Homeowners Call Level Two Chimney Kennesaw for Famco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and the Famco units we see in Kennesaw - especially the older FMI B-Vents in the two-story colonials near Kennesaw Mountain - have predictable failure patterns we’ve documented season after season. Our techs know the difference between a FASCO blower and a cheap knockoff, and we source materials through our Haven buying network from DuraFlex, HeatShield, Gelco, and the same suppliers that stock Famco-compatible parts. The 365-Day Done Right Promise applies to every job, and the photo record we leave with you is the same documentation we use if a question comes up later. We’re independently owned and operated - not a franchise, not affiliated with Famco - and Corrine Halstead assigns a named, background-checked tech to every appointment.

FAQs