Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The Kennesaw Owner’s Guide

We stock and install Olympia Chimney-compatible flue liner replacement in Kennesaw for $2,800-$4,200 installed, depending on flue height, diameter, and whether the existing liner pulls clean or has to be cut out. Most Olympia Chimney liner jobs we book in Kennesaw are completed in a single day once the written scope is signed. Corrine Halstead and our crew carry Olympia Chimney spec sheets on every truck, so we’re not guessing at alloy grade or collar fitment when we quote your job.

Call (678) 535-2204

Most Kennesaw homeowners find out their flue liner is shot during a routine sweep, or when they notice odd smells after the first cold snap. The liner is hidden inside the flue, so failure shows up indirectly: draft problems, moisture stains on the firebox wall, or a chimney cap that suddenly drips rust. In the older colonials near Kennesaw Mountain, we regularly see Olympia Chimney liners that have been cooking since the mid-2000s without a camera ever being run. That’s usually how we get the call.

Which Olympia Chimney Models This Applies To

Olympia Chimney builds three main liner series that show up in Kennesaw homes: the 316Ti flexible stainless line, the 304 alloy economy series, and the rigid 316L system used in straight masonry chimneys with minimal offsets. The label you’ll need is stamped on the liner collar at the top of the flue, or on the warranty card if the previous owner filed it. If the label’s gone, we measure inner flue diameter, count offsets, and pull a camera sample to determine alloy grade. We don’t quote replacement blind.

The OEM-versus-aftermarket question for Olympia Chimney is straightforward in our experience. Olympia Chimney’s own 316Ti carries a lifetime warranty when installed with their collar and insulation mix, but the price per foot runs higher than Gelco or DuraFlex equivalents. For Kennesaw’s clay-heavy soil and the freeze-thaw cycling we get January through March, we typically spec Olympia Chimney OEM or a DuraFlex 316Ti equivalent with comparable mil thickness. HeatShield is an option for relining instead of full replacement, but only if the existing liner is structurally intact and the flue has no active leaks. We source all three through Haven’s buying network, which keeps the price honest and the lead time short.

One compatibility gotcha: Olympia Chimney’s 2014-2018 flexible liners used a proprietary twist-lock collar that doesn’t mate with standard top plates. If your home was built or relined in that window, the replacement collar has to be ordered specific or machined to fit. We check that on the first camera pass so we’re not surprising you with a parts delay after you’ve already signed.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Draft reversal or smoke spillage on startup. A liner with pinholes or seam separation can’t maintain the temperature differential that pulls smoke upward. In Kennesaw’s humid summers, we’ve seen Olympia Chimney 304 liners corrode through at the first offset, right where condensation pools.
• White efflorescence or rust streaks inside the firebox. These salts and oxides mean flue gases are escaping the liner and condensing on the cooler masonry surround. The liner’s job is to contain combustion byproducts; staining means it’s not.
• Chunks of tile or metal in the cleanout. Older Olympia Chimney rigid systems shed spalled clay or corroded stainless as they age. If you’re sweeping out fragments, the liner wall is thinning and will eventually breach.
• Carbon monoxide detector alerts near the hearth. This is the one that moves fast. A perforated liner can vent CO into wall cavities or living space. We don’t negotiate on this: if your detector’s chirping and the flue hasn’t been camera-inspected in two years, we need to look.
• Visible gaps or sag in a flexible liner viewed from below. Olympia Chimney flex liners can lose tension at support points, especially in tall Kennesaw chimneys with multiple offsets. A sag traps creosote and creates a secondary combustion risk.

Before

After

Replacement Cost & What’s Included

What drives the range: flue height, number of offsets, whether the existing liner can be pulled or must be cut and extracted piecemeal, and whether the smoke chamber needs parging before the new liner seats clean. We don’t know which until the camera goes down. That’s why Clause 1 of the Haven Standard requires a written price before work starts - we write it down before we ask you to decide anything.

Every Olympia Chimney liner replacement we install in Kennesaw carries the 365-Day Done Right Promise. Materials are sourced through Haven’s buying network from Olympia Chimney, DuraFlex, Gelco, or HeatShield depending on what your flue spec demands. The warranty is written, not verbal, and it’s in your hand before the crew starts.

DIY or Call Us?

There’s a short list of things a Kennesaw homeowner can safely check without tools: confirm the damper opens fully, look for debris on the smoke shelf, and verify the chimney cap isn’t clogged with leaves or wasp nests. Beyond that, flue liner work goes wrong fast.

Pulling a liner requires dropping a rope from the top, often on a steep roof, while managing a coil of stainless that can kink or gouge masonry if it binds. Cutting out a failed rigid liner means masonry demolition inside the flue, sometimes with a rotary hammer in a confined space. And here’s the part that matters: a liner installed without proper insulation clearance or support spacing voids every manufacturer’s warranty and creates a chimney fire path that you won’t know about until it’s too late. NFPA 211 requires a Level 2 inspection after any liner work; we include that documentation as standard under Haven Standard Clause 4.

We’re not going to tell you this is rocket science. We’re going to tell you that Corrine Halstead has seen enough DIY liner jobs in Kennesaw to know where the shortcuts hide, and that our written price includes fixing the flue right the first time. If you’re holding a competitor’s quote and it doesn’t specify alloy grade, insulation, or a photo record, bring it in. Our Free Second Opinion is exactly that - free, written, and no obligation.

FAQs