Olympia Chimney Chimney Cleaning & Sweep Nationwide

Olympia Chimney Chimney Cleaning & Sweep in Kennesaw: What to Know First

We provide independent Olympia Chimney chimney cleaning and sweep services in Kennesaw, with most inspections completed same-week and a written price delivered before any work is scheduled. A standard Level 2 camera inspection and sweep for an Olympia Chimney liner or venting system runs $189-$329 in this market, depending on creosote class and flue accessibility. We write it down before we ask you to decide anything.

Call (678) 535-2204

This page is for Kennesaw homeowners who installed an Olympia Chimney stainless steel liner, chimney cap, or venting component between 2015 and 2023 and need documented cleaning, inspection, or repair. Corrine Halstead and our crew have worked on hundreds of Olympia Chimney systems in Cobb County, including the older colonials near Kennesaw Mountain where clay-to-steel liner retrofits are common. Call (678) 535-2204 for a written estimate - no verbal quotes, no surprises.

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia 316Ti flexible liner: creosote bridging at the tee body. The tee connection on early 316Ti series liners has a slightly sharper interior angle than competing brands, which traps Class II and III creosote where the horizontal meets the vertical. We see this most in Kennesaw homes burning seasoned oak on insert systems with marginal draft. Our fix: mechanical rotary cleaning with a custom-sized poly brush, then a camera pass to confirm the tee is fully open. If the tee is damaged, we source an exact Olympia replacement or a Famco equivalent that matches the 316Ti gauge.
• Olympia Gelco-top chimney cap: mesh corrosion from Atlanta humidity cycles. Kennesaw’s spring and fall humidity swings accelerate galvanic corrosion where the Gelco-top’s 304 mesh meets the cap frame. The mesh doesn’t fail structurally, but the corrosion flakes drop into the flue and mix with soot to form acidic sludge. We remove the cap, document mesh integrity with photos, and either clean and reseat the original or replace with a Copperfield equivalent if the frame is compromised. Clause 4 of the Haven Standard requires those photos in your record.
• Olympia DuraFlex pro liner: separation at the collar joint above the smoke chamber. The DuraFlex pro uses a crimp-and-collar connection that can work loose after 5-7 thermal cycles, especially in Kennesaw’s freeze-thaw winters when homeowners run intermittent fires. We find this with the camera, not a flashlight. The repair is a mechanical reseat with a new DuraFlex collar, or if the liner has shifted, a full pull and reinstall with proper tension. We never guess - the camera shows the gap in millimeters.
• Olympia HeatShield-compatible liner: refractory coating delamination. Some Kennesaw installers spec’d Olympia liners with HeatShield refractory coating for unlined masonry chimneys. The coating can spider-crack if the underlying brick was damp during application, which is common in basements near Noonday Creek’s drainage zone. We camera-scan for exposed metal, then either spot-repair with HeatShield Cerfractory foam or recommend a full reline if the delamination exceeds 12 continuous inches. The photo record shows you exactly where the problem starts and stops.
• Olympia oval-to-round adapter: soot packing in the transition zone. This adapter, used when a rectangular flue meets a round liner, has a slightly shorter taper than code minimum on pre-2019 production runs. Soot packs tight in the dead zone and hardens into a fire risk. We use a reverse-skip rotary chain to break it loose, then verify clear diameter with the camera. If the adapter is the restricted production run, we replace with a current-spec Olympia part or a Gelco equivalent that meets the longer taper requirement.

Our Olympia Chimney Chimney Cleaning & Sweep Process

1. 1
   Call and schedule. A live person answers, checks availability in Kennesaw or nearby Acworth and Marietta, and notes your Olympia Chimney model if you know it. You’ll get a text when your tech is en route.
2. 2
   Level 2 camera inspection. We run a chimney camera the full flue length, including the smoke chamber and any Olympia tee or adapter. You see what we see on the monitor. Corrine’s rule: no homeowner guesses at what they’re looking at.
3. 3
   Written price and scope. Before any cleaning or repair, you get a single-page document with the findings, the work recommended, the exact price, and the warranty terms. Haven Standard Clause 1: have it in writing.
4. 4
   Cleaning and repair. We use brushes and chains sized to your exact Olympia liner diameter, not one-size-fits-all tools. OEM Olympia parts or quality equivalents from our DuraFlex, HeatShield, Gelco, and Copperfield inventory - sourced through Haven’s buying network to keep prices honest.
5. 5
   Post-work camera verification and photo record. The camera goes down again to prove the flue is clear and any repair is seated. Clause 4 of the Haven Standard requires a documented photo record on every job - included, not extra.
6. 6
   365-Day Done Right Promise activation. Your written warranty is stamped and active. If it’s not done right, we make it right.

Before

After

What Olympia Chimney Chimney Cleaning & Sweep Costs in Kennesaw

What moves the price: flue height above two stories, roof pitch that requires ladder assist, Class III glazed creosote requiring multiple mechanical passes, and parts availability for discontinued Olympia series. We source through Haven’s multi-brand network to avoid the OEM-only markup some competitors pass along. Every estimate is free, written, and valid for 30 days. Call (678) 535-2204 for your exact number.

Why Kennesaw Homeowners Call Level Two Chimney Kennesaw for Olympia Chimney Work

We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented record when done. As an independent Olympia Chimney service provider, we’re not bound to factory parts at factory prices - we use what works, from Olympia originals to DuraFlex, HeatShield, Gelco, and Copperfield equivalents, and we show you the difference on camera before you decide.

Our techs are background-checked, uniformed, and named on your appointment text. The 365-Day Done Right Promise covers every job. And if another company handed you a written estimate that doesn’t sit right, our Free Second Opinion is exactly that: free, written, and no obligation. Corrine Halstead and our crew have been on Kennesaw rooftops long enough to know which Olympia installations were done well and which were rushed - and we say so plainly, with photos to back it up.

FAQs