HeatShield Chimney Cap & Crown Nationwide

HeatShield Chimney Cap & Crown in Kennesaw: What to Know First

Level Two Chimney Kennesaw provides independent HeatShield chimney cap and crown service throughout Kennesaw, from standard cap swaps on single-flue systems to full crown resurfacing with HeatShield’s proprietary coating systems. Most HeatShield cap and crown jobs we book in Kennesaw are completed within one scheduled visit, with a written price delivered before any work starts and a documented photo record sent after. We’re not affiliated with or authorized by HeatShield - we’re an independent service provider who sources parts through Haven’s buying network and knows where these products tend to fail in Cobb County’s wet winters and sudden spring temperature swings. If you own a HeatShield cap or crown and want an honest assessment of whether it needs repair, replacement, or just a proper inspection, call (678) 535-2204. We write it down before we ask you to decide anything.

Call (678) 535-2204

How HeatShield Products Fail - and How We Fix Them

• HeatShield ProForm crown coating delamination on south-facing Kennesaw stacks. The ProForm resurfacing system holds up well overall, but we’ve tracked repeated separation where the original crown was poured with too little slope and the Georgia sun bakes the southern exposure while afternoon thunderstorms hit it cold. The coating lifts at the edges, water gets underneath, and freeze-thaw in January finishes the job. We strip the failed coating, re-pitch the crown for proper runoff, then reapply with a modified base coat formulated for Cobb County’s UV load.
• HeatShield CeCure flue liner caps corroding at the mesh weld. The CeCure stainless mesh is 304-grade, which is adequate for most applications, but when it’s paired with a galvanized spark arrestor frame in Kennesaw’s humid shoulder seasons, the galvanic reaction eats the weld in 4-7 years. We catch this during camera inspection because the first sign is rust staining down the flue tile. Our fix: replace with a 316L marine-grade cap from our Haven network, or source the OEM CeCure replacement cap if the homeowner prefers - priced both ways in writing before we order.
• HeatShield Joint Repair crowns cracking at the flue tile interface. The Joint Repair system is built for flue restoration, but some Kennesaw installers in the 2015-2019 window used it as a crown repair shortcut, slopping it over the crown-to-flue joint without proper expansion accommodation. It cures hard, the flue expands when the fireplace runs, and the crown cracks in a neat ring. We remove the misapplied material, cut a proper reglet joint, and rebuild with CrownCoat or a poured concrete crown depending on the damage depth.
• Multi-flue HeatShield caps pooling water on low-slope Kennesaw roofs. HeatShield’s multi-flue cap line works fine when the lid has adequate pitch, but on the shallow rooflines common in Legacy Park and the older sections near Kennesaw Mountain, the factory 3/12 pitch isn’t enough. Water sits, leaf debris ferments, and the cap frame rusts from the inside out. We measure the actual roof pitch on site, then spec a custom-fabricated lid at 5/12 or steeper from our Olympia Chimney supply line - or modify the HeatShield frame with a raised cricket if the homeowner wants to keep the original brand visible.
• HeatShield chase cover sealant failing at the storm collar on manufactured chimneys. The factory bead of sealant where the chase cover meets the flue pipe dries out faster in Kennesaw than the company specs suggest - we think it’s the combination of summer attic heat and winter stack effect pulling cold air. Water tracks down the flue pipe and pools in the firebox. We remove the chase cover, reseal with a high-solids silicone rated for 400°F continuous, and add a secondary storm collar with a drip edge. Camera inspection before and after, per Clause 4 of the Haven Standard.

Our HeatShield Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, checks Corrine’s calendar for Kennesaw, and books a window. You get a text when your tech is en route.
2. 2
   NFPA 211 Level 2 inspection with camera. We run the camera down the flue, photograph the crown from the roof and the ladder, and document cap condition, mesh integrity, and rust patterns. Every image is time-stamped and saved to your job record.
3. 3
   Written diagnosis and price. Corrine reviews the findings with you on-site or by phone, explains whether the fix is cap-only, crown-only, or both, and delivers a written scope with two parts: the repair and the price. OEM HeatShield parts and quality aftermarket alternatives are priced separately if both apply.
4. 4
   Repair with documented steps. Tech performs the work, photographs each stage, and notes any deviations from the written scope with your approval.
5. 5
   Final camera verification and cleanup. We re-inspect with the camera, confirm proper draft and water shedding, leave the work area clean, and upload the complete photo record to your account.
6. 6
   Warranty and follow-up. The 365-Day Done Right Promise applies. Your written warranty specifies materials, labor coverage, and what “done right” means for your specific repair.

Before

After

What HeatShield Chimney Cap & Crown Costs in Kennesaw

These are the prices we actually write down for Kennesaw homeowners - not opening bids that shift once we’re on the roof. Every estimate includes the camera inspection, photo documentation, and a second-opportunity review if you’ve got a competitor’s written quote in hand. Call (678) 535-2204 for your exact number; estimates are free.

Why Kennesaw Homeowners Call Level Two Chimney Kennesaw for HeatShield Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of the Kennesaw calls Corrine fields now involve HeatShield products installed during the 2015-2019 new-construction boom in neighborhoods like Legacy Park and Barrett Greene. Those caps and crowns are hitting their first real maintenance cycle. Our techs know the difference between a CeCure cap that needs cleaning and one that’s galvanically compromised. If HeatShield parts are back-ordered or priced out of line, we pull from DuraFlex, Gelco, or Olympia Chimney through Haven’s buying network - same spec, honest price, no markup theater. The 365-Day Done Right Promise is stamped on every job. And Clause 4 of the Haven Standard means you get the camera footage and the stills, not a verbal summary that changes when you ask to see it again.

FAQs