Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Kennesaw, GA?
Chimney repair in Kennesaw, GA typically runs between $150 and $4,500, depending on what needs fixing. Minor work like tuckpointing a few mortar joints or swapping a chimney cap sits at the low end; a full flue liner replacement or smoke chamber rebuild pushes toward the top. Most Kennesaw homeowners pay somewhere in the $400-$1,200 range for a single repair visit.
Below is a full breakdown of what individual repairs cost in this market, what drives the price up or down, and how to read a competitor’s quote before you agree to anything. Every price on this page reflects what Level Two Chimney Co. actually charges in Kennesaw – written down before work starts, not estimated verbally after a technician is already on your roof.
Chimney Repair Cost Breakdown (2026)
The table below covers the most common chimney repair line items we see on Kennesaw homes. These are real ranges – not national averages pulled from a home-services aggregator. They reflect local labor rates, Georgia clay brick pricing, and the material costs we see through our supply network (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield).
| Repair Type | Typical Price Range | Notes |
|---|---|---|
| Chimney Cap Replacement | $150 - $400 | Stainless or copper cap; includes removal and installation |
| Mortar Joint Tuckpointing (minor) | $200 - $550 | Surface-level mortar repair; 1-3 courses of brick |
| Chimney Crown Repair | $250 - $700 | CrownCoat or hydraulic cement; full rebuild listed separately |
| Chimney Crown Rebuild | $600 - $1,400 | Full pour, proper slope, and drip edge formed |
| Spalling Brick Repair (minor) | $350 - $900 | Replace damaged face brick; color match on older Kennesaw homes can affect price |
| Flashing Repair or Reseal | $300 - $750 | Counter and step flashing; common on Kennesaw homes built 1985-2005 |
| Flashing Replacement (full) | $700 - $1,500 | Tear-out and new step/counter flashing; lead or aluminum depending on roof pitch |
| Smoke Chamber Parging | $400 - $900 | HeatShield Cerfractory Parge applied to corbelled chamber walls |
| Flue Liner Repair (HeatShield) | $1,000 - $2,500 | Resurfacing system for cracked or spalling tile liners; camera verification included |
| Flue Liner Replacement (flexible) | $1,800 - $3,800 | DuraFlex stainless liner; price varies by flue height and appliance type |
| Full Masonry Chimney Rebuild (partial) | $2,200 - $4,500 | Above-roofline teardown and rebuild; structural mortar and brick |
| Damper Repair or Replacement | $175 - $500 | Throat or top-mount damper; Kennesaw homes often have cast-iron throat dampers that corrode |
| Waterproofing Treatment | $150 - $400 | Vapor-permeable sealant applied after masonry repairs; helps against Kennesaw’s wet spring cycle |
What a “Typical” Repair Visit Looks Like in Kennesaw
Most calls we get in Kennesaw start the same way: a homeowner noticed something – water stains on the firebox wall, mortar crumbling at the roofline, a cap that blew off in a storm. When we arrive, the camera goes down the flue first. What the camera finds often adds a line item or two, and that’s not a bait-and-switch – it’s just that crowns crack from the outside and liners crack from the inside, and you can’t see both from the ground.
A crown repair plus a flashing reseal plus waterproofing – a very common Kennesaw combination – lands between $700 and $1,850 depending on crown condition and flashing material. A damper replacement with minor tuckpointing typically runs $400-$900. If the camera shows a cracked flue liner on top of visible exterior damage, expect the total to move into the $2,000-$3,500 range.
Every number above gets put in writing before anyone picks up a tool. That’s not a policy we adopted recently – it’s been the standard at Level Two since 2009, and it’s codified as Haven Standard Clause 1: a written price, written scope, and written warranty before work starts.
What Affects Chimney Repair Pricing in Kennesaw
Two Kennesaw chimneys with the same visible symptom – say, water leaking into the firebox – can have repair costs that differ by $1,000 or more. Here are the six factors that move the number most consistently in this market.
- Access and roof pitch. Kennesaw sits on rolling terrain, and a lot of the homes in the Bells Ferry Road and Stilesboro corridors have steep 8:12 or 10:12 pitches. Steeper roofs mean more time to stage safely and sometimes require additional equipment. That adds $100-$300 to almost any roofline repair.
- Brick age and availability. A significant share of Kennesaw’s housing stock was built between 1978 and 1998, which means older Georgia common brick. Matching spalled face brick in color and texture is harder on a 1988 chimney than on a 2010 one. When we can’t find a close match through our supply network, we discuss options with the homeowner before ordering – that conversation is part of the written scope.
- Kennesaw’s wet spring cycle. Cherokee and Cobb County average around 52 inches of rain per year, and it tends to front-load in March through May. Chimneys on homes that sat unoccupied or minimally heated through a wet winter often show accelerated mortar deterioration and spalling by the time a new owner calls us. Freeze-thaw cycling is less severe here than in northern Georgia, but it still happens – and water that got in over five winters does more damage than water from one.
- Extent of liner damage. A hairline crack in a clay tile liner might be addressable with HeatShield’s resurfacing system at $1,000-$2,500. A liner that’s collapsed or has displaced tiles requires full replacement, which is a different scope and a different price. The camera tells us which situation we’re in – guessing without one isn’t a real diagnosis.
- Flashing condition and original installation quality. In the neighborhoods around Barrett Parkway and Old 41, we regularly find step flashing that was installed without counter-flashing and sealed with caulk alone – which holds for a few years and then fails quietly. Repairing a half-done original job sometimes costs more than a clean replacement would, because the old material has to come out first.
- Number of repairs needed at once. A chimney that needs a crown rebuild, new flashing, and a liner repair is three separate line items – but combining them on one visit saves a service call and reduces staging time. We price each scope line separately so you can see exactly what each repair costs, and then you can decide whether to do them together or in phases. We’ll give you a clear recommendation on what’s urgent and what can wait.
Before
AfterCommon Kennesaw Chimney Problems and What They Cost to Fix
If you’re trying to figure out whether what you’re seeing is a $300 problem or a $3,000 problem, these are the patterns we see most often on Chimney Repair in Kennesaw calls.
Water in the Firebox
This is the most common complaint we get on first calls. The source could be a failed crown, bad flashing, a missing or ill-fitting cap, or a cracked liner – and in Kennesaw’s spring rain season, all four can be contributing at once. Diagnosis starts with the camera. Crown repair alone runs $250-$700; if flashing and a cap are also involved, budget $600-$1,800 for the combination.
Crumbling Mortar at the Roofline
In Cobb County, we see this most on chimneys that face northwest – the direction of Kennesaw’s prevailing winter weather. Mortar repointing on a few damaged courses runs $200-$550. If the deterioration has reached the structural mortar bed joints rather than just the face joints, you’re looking at a partial rebuild: $2,200-$4,500 depending on how many courses need to come down.
Spalling Brick
Spalling brick repair is needed when the brick face separates and flakes off – it usually means water has been getting into the masonry for a while. On Kennesaw homes with older common brick, the repair cost depends heavily on how far the damage has spread and whether matching brick is available. A localized repair (6-12 bricks) typically runs $350-$900. Widespread spalling across the entire above-roofline section pushes toward a full rebuild.
Damaged or Missing Chimney Cap
A basic stainless cap replacement runs $150-$400 installed. Kennesaw gets its share of summer thunderstorms, and lightweight galvanized caps (common on 1990s construction) don’t last as long as stainless or copper. A missing cap also means the flue has been open to rain, debris, and wildlife – if the cap has been gone more than one season, a liner inspection before or at the same time makes sense.
Smoke Backing Up Into the Room
This is almost never a single-cause problem. The smoke chamber, the damper, the liner height, and even nearby tree growth can all contribute. Smoke chamber parging with HeatShield Cerfractory Parge costs $400-$900 and often resolves draft issues that originate there. If the damper is corroded or warped, add $175-$500 for replacement. Liner issues that affect draft are priced separately after camera inspection.
How to Read a Chimney Repair Quote in Kennesaw
Before you sign anything, there are five things a quote should tell you – and if it doesn’t, the number on the page doesn’t mean much.
- Scope is in writing, by line item. “Chimney repair – $800” tells you nothing. A real quote names the crown repair, the flashing reseal, and the waterproofing as separate items with separate prices.
- Materials are named. “Standard liner” is not a specification. DuraFlex 316L stainless at a specific diameter for a specific appliance is a specification. Materials matter for longevity and for warranty eligibility.
- Warranty terms are written, not verbal. If the technician says “we stand behind our work,” that’s a feeling, not a commitment. A written warranty names what’s covered, for how long, and what the remediation process is if something fails.
- The inspection finding is documented. Any company that quotes repairs without a camera inspection is quoting blind. A photo record or camera footage should come with the diagnosis, not just the invoice after the work is done. Under Haven Standard Clause 4, Level Two includes this documentation on every visit as a matter of record – not as an optional add-on.
- The technician is identified by name. You should know who is coming to your home before they arrive. We assign a named technician and send a text when they’re on the way.
If you have a written quote from another company and something in it looks off, bring it to us. We offer a Free Second Opinion on any written estimate – we’ll tell you whether the scope makes sense, whether the price is in line with the Kennesaw market, and whether anything looks missing. No obligation to book with us.
How to Save on Chimney Repair in Kennesaw
Chimney repair isn’t a category where the cheapest quote usually wins. The most expensive outcome is paying a low price for work that fails in 18 months and has to be redone. That said, there are real ways to keep costs reasonable without cutting corners on materials or documentation.
Get the Inspection Before the Problem Gets Worse
A cracked crown that’s caught early costs $250-$700 to fix. A cracked crown that’s been open through two Kennesaw wet springs, letting water into the liner and the smoke chamber, can easily become a $3,000-$5,000 repair. A Level 2 camera inspection – the kind specified in NFPA 211 – finds the problem while it’s still a small one. On every visit we make in Kennesaw, the camera goes down the flue and you get the documented photo record. The diagnostic cost is built into the visit, not billed separately.
Combine Repairs When It’s Practical
If the camera shows a crown issue and flashing damage at the same time, doing both repairs on one visit saves a service call and reduces staging time. We’ll tell you which repairs are genuinely urgent and which can wait six to twelve months, so you can make a practical decision without feeling pushed.
Ask for a Phase Plan
If the total scope is larger than you want to handle at once, ask for a written phase plan that prioritizes by urgency. Water-entry repairs (crown, flashing, cap) should almost always come before cosmetic masonry work. A phase plan lets you protect the structure now and address appearance later.
Use the Free Second Opinion
If you have a written quote and it seems high – or if it seems unusually low and you want to understand why – bring it to us. We’ll review it honestly. If the other quote is fair and the scope is accurate, we’ll tell you that. Call (678) 535-2204 to set up a free estimate or second opinion. Estimates are free, written, and delivered before any work is discussed.
Don’t Skip Waterproofing After Masonry Repairs
This is the one place where skipping a line item to save $150-$400 tends to cost more later. Kennesaw’s annual rainfall and spring humidity give water plenty of opportunities to re-enter freshly pointed mortar if it isn’t sealed. A vapor-permeable waterproofing treatment applied after tuckpointing or crown repair extends the life of the repair significantly – it’s not an upsell, it’s maintenance logic.
What Level Two Chimney Co. Includes on Every Kennesaw Job
Since 2009, Level Two Chimney Co. has completed more than 38,000 chimney inspections and cleanings, every single one with a written price before work started and a documented record when it was done. In Kennesaw specifically, the homes we work on most often were built in the 1980s and 1990s – and that era of construction comes with its own patterns: throat dampers that corrode, flashing that was caulked rather than properly lapped, and clay tile liners that have been through 30-plus heating seasons.
Here’s what every visit includes:
- NFPA 211 Level 2 camera inspection. The camera goes down the flue. Every time. The footage and a photo record are yours to keep – documented under Haven Standard Clause 4.
- Written price before any work starts. Haven Standard Clause 1. Not a verbal estimate, not a range – a written price for a written scope.
- Written warranty on every repair. The 365-Day Done Right Promise is on every job. If it’s not done right, we make it right.
- Background-checked, uniformed technician. Named in advance. Text notification when on the way.
- Live phone support 24/7. A real person answers. If something comes up after the job, you’re not sending a web form into the void.
You can learn more about our work and our approach on our home page, or go straight to the Chimney Repair in Kennesaw service page if you want to see the full scope of what we handle.
FAQs – Chimney Repair Cost in Kennesaw, GA
How much does chimney repair cost in Kennesaw, GA?
Chimney repair in Kennesaw costs between $150 and $4,500 depending on the type and extent of damage. Minor repairs like a chimney cap replacement or surface tuckpointing start around $150-$550. Mid-range repairs – crown rebuilds, full flashing replacement, smoke chamber parging – typically run $600-$1,500. Liner repairs and major masonry work range from $1,800 to $4,500. Most single-item repair visits in the Kennesaw market land between $400 and $1,200. Call (678) 535-2204 for a written estimate with exact numbers for your chimney.
How much does it cost to replace a chimney flue liner in Kennesaw?
A flexible stainless steel flue liner replacement in Kennesaw costs $1,800-$3,800 installed, using DuraFlex 316L material. The range reflects flue height (most Kennesaw homes have 15-25 foot chimneys), liner diameter, and the type of appliance it’s serving (wood-burning versus gas). If the liner can be repaired rather than replaced – which HeatShield’s resurfacing system allows in some cases – that runs $1,000-$2,500 and is worth assessing with a camera inspection first. Call (678) 535-2204 for a written liner quote.
Is it cheaper to repair or replace a chimney in Kennesaw?
Repair is almost always cheaper than full replacement, but the answer depends on what’s failing. A partial rebuild above the roofline costs $2,200-$4,500 and makes sense when structural mortar and brick are compromised. A full teardown and rebuild is rarely the right call unless the chimney has severe structural failure or a settlement issue – which is uncommon but does happen on Kennesaw lots with expansive clay soil. The camera inspection tells us what’s structurally sound and what isn’t. We’ll give you a written comparison if both options are viable. Call (678) 535-2204.
Can you fix a chimney crown without replacing the whole crown?
Yes, in many cases. If the crown has surface crazing or minor cracks but the substrate is intact, a CrownCoat application can seal and reinforce it for $250-$500. If the crown is crumbling, has separated from the flue tile, or was originally poured with inadequate overhang and no drip edge, a full rebuild at $600-$1,400 is the right call – recoating a structurally failed crown just delays the water entry by a season or two. The camera and a close look at the crown condition tells us which situation applies. Call (678) 535-2204 for a free estimate.
How long does chimney repair take in Kennesaw?
Most single-item repairs are completed in 2-5 hours on the same visit as the inspection. Crown rebuilds and full liner replacements typically take a full day. Major masonry work – partial rebuilds or extensive spalling repair – may require two visits, especially if brick has to be ordered to match the original. We give you a timeline in writing as part of the scope before work starts. Call (678) 535-2204 to schedule.
Do I need a permit for chimney repair in Kennesaw, GA?
Most surface-level chimney repairs in Kennesaw – tuckpointing, crown repair, cap replacement, flashing work – do not require a building permit under City of Kennesaw or Cobb County regulations. Structural work, including above-roofline masonry rebuilds or liner system installations connected to a gas appliance, may require a permit depending on scope. We identify permit requirements as part of the written scope and handle the filing where required. You won’t be handed that task without notice. Call (678) 535-2204 if you have questions about your specific situation.
Get a Written Chimney Repair Estimate in Kennesaw
If you’re trying to figure out what a chimney repair will actually cost on your Kennesaw home – not a national average, not a verbal guess over the phone – the fastest path is a camera inspection and a written price. Level Two Chimney Co. has been doing this in the Kennesaw area since 2009. The camera goes down the flue, the findings are documented, and you get a written scope and price before anyone starts work. Corrine Halstead and the Level Two team back every job with the 365-Day Done Right Promise. If you have a quote from another company, bring it – the Second Opinion is free.
Call (678) 535-2204 to schedule a free estimate. A live person answers, any time.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Kennesaw, GA since 2009. Pricing reflects the Kennesaw market as of 2026. Level Two Chimney Kennesaw offers free estimates – call (678) 535-2204.
What Our Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.