Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Roswell
Fireplace services in Roswell, GA typically cost $195-$485 depending on the system type and condition, with most Level 2 camera inspections completed in 60-90 minutes and a written price delivered before any work begins. Our crews serve Roswell from our Atlanta dispatch office, carrying Gelco and Olympia Chimney parts so we don’t waste a trip back to the warehouse when we find what needs fixing.
We’re familiar with the split personality of Roswell’s housing stock: the rapid build-out between 1978 and 1998 that packed neighborhoods like Horseshoe Bend and Martin’s Landing with zero-clearance prefabricated fireplaces, and the pre-Civil War and early 20th-century homes clustered near Bulloch Hall and along the Canton Street corridor with original multi-story brick chimneys. That difference matters because a prefab metal-box unit in a wood-framed chase can’t be relined when it fails - it needs full replacement. A masonry chimney can be repaired indefinitely. Knowing which you have before we arrive saves everyone time. Call (678) 535-2204 to schedule.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Level Two Chimney Kennesaw Is Roswell’s Preferred Fireplace Services Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented photo record when it was done. In Roswell specifically, our replacement-discovery rate for aging prefab fireplaces runs higher than in older masonry markets - homeowners here need inspectors who won’t confuse a failing metal firebox with a relineable masonry flue.
Our technicians are background-checked and uniformed, with license information displayed on every page and a named tech assigned to your job. You’ll get a text when they’re on the way. Calls are answered by a live person, 24 hours a day, 7 days a week - not a voicemail tree.
The 365-Day Done Right Promise applies to every job in Roswell: if it’s not done right, we make it right. And our Free Second Opinion on Any Written Estimate means you can bring us a competitor’s quote and we’ll tell you exactly what we see, with camera evidence, before you spend anything.
Dispatch and scheduling for Roswell are coordinated from our Atlanta office, with crews carrying local inventory so most repairs don’t require a return visit.
Our Fireplace Services in Roswell
Gas Fireplace Service
Gas fireplaces in Roswell’s 1980s and 1990s homes often sit in zero-clearance prefab chassis that are now 25-45 years old. The burner orifices clog, the pilot assemblies weaken, and the venting - originally designed for a specific BTU output - may have been modified by a previous homeowner without proper engineering. We test gas pressure, inspect the venting path with camera, and check for proper clearances to combustibles. In the Historic District, we regularly find gas log sets installed in the 1990s with the original damper left permanently open and no cap installed, letting Chattahoochee-corridor moisture and nesting chimney swifts occupy the flue for years. A typical gas fireplace service in Roswell runs $195-$295.
Wood Burning Fireplace
Roswell’s pattern of wet 35°F nights cycling to mild 60°F afternoons is particularly destructive to mortar joints and chimney crowns. Many homeowners assume their 20-40 fires per season counts as “light use” and skip annual inspections. In reality, low-temperature smoldering fires deposit sticky Stage 2 creosote faster than high-heat burns. We remove creosote by class - first-degree (sooty, brush-removable), second-degree (flakey, requires chains or rotary tools), or third-degree (glazed, requires chemical treatment or replacement) - and document the condition of the smoke chamber, firebox, and flue liner with camera footage you can see. A wood burning fireplace sweep and inspection in Roswell typically costs $245-$345.
Fireplace Insert
Fireplace inserts are where Roswell homeowners get sold hard. An insert installed into a masonry chimney without a proper stainless steel liner, or shoved into a prefab firebox never designed for the additional heat load, is a documented fire hazard. We see this frequently in the large traditional and Colonial-style homes built during the 1980s-90s Atlanta suburban expansion, where decorative prefab fireplaces were standard builder inclusions. Our Fireplace Services team runs a full Level 2 inspection before quoting any insert work. If your prefab unit is at end of life, we’ll show you the cracked heat exchanger or warped metal on camera and explain why replacement, not an insert, is the only safe option. Fireplace insert installation with proper liner in Roswell runs $2,800-$4,500.
Damper Repair
Dampers in Roswell fail two ways: they rust open from Chattahoochee-valley humidity, or they seize shut from creosote buildup. A damper stuck open bleeds conditioned air year-round and lets rain and animals enter. A damper stuck shut traps combustion gases in the living space. In historic-district homes converted to gas in the 1990s, we regularly find dampers intentionally wired open by installers who didn’t want to deal with proper venting - a shortcut that creates a continuous chimney effect, pulling heat from your home. We repair or replace throat dampers, install top-sealing dampers for better efficiency, and always verify proper closure with visual inspection. Damper repair or replacement in Roswell typically costs $295-$485.
Firebox Repair
The firebox is where combustion happens, and in Roswell’s aging prefab units, the metal heat exchangers crack or warp after 20-30 years of thermal cycling. In masonry fireboxes, we see spalling brick and deteriorated refractory mortar, especially where the Roswell humidity freeze-thaw cycle has penetrated small cracks. We repair with HeatShield refractory mortar or recommend replacement when the structural integrity is compromised. Nothing is recommended without camera evidence you can see for yourself.
Fireplace Conversion
Converting a wood-burning fireplace to gas, or updating an old gas set to modern direct-vent, requires verifying that the existing chimney or vent system can handle the new appliance’s requirements. In Roswell, this is critical: many historic-district flues were never designed for the moisture output of modern gas inserts, and many 1980s-90s prefab chassis can’t accept the heat load of a conversion without exceeding clearances. We handle the gas line coordination, permit guidance, and full venting inspection. Fireplace conversion in Roswell typically runs $1,800-$3,200 depending on gas line routing and venting requirements.
Before
AfterTrusted Brands We Service in Roswell
We stock parts and materials from Gelco, Olympia Chimney, and Famco through our Haven buying network, which means most repairs on Roswell homes don’t wait on shipping. Gelco chimney caps and chase covers handle the persistent humidity of the Chattahoochee corridor better than generic hardware-store versions. Olympia Chimney’s stainless steel liners are what we specify for historic-district masonry restorations where the original clay tile has spalled. Famco dampers and venting components cover the common prefab configurations we see in Horseshoe Bend and Martin’s Landing. Because we procure through Haven’s network specifically to keep customer prices honest, you’re not paying retail markup on special-order parts.
Common Fireplace Services Problems We See in Roswell Homes
- Prefab fireplaces past design life. The zero-clearance units installed during Roswell’s 1978-1998 build-out in neighborhoods like Horseshoe Bend and Martin’s Landing are now 25-45 years old, well past their 20-30-year design life. When the heat exchanger cracks or the metal warps, these units must be fully replaced - not relined, not repaired, replaced - which homeowners often don’t realize until we show them on camera.
- Historic-district gas conversions with open dampers and no caps. Technicians working the older streets near Bulloch Hall regularly find exterior brick chimneys converted to gas log sets in the 1990s with the original damper left permanently open and no cap installed. This combination lets Chattahoochee-corridor moisture and nesting chimney swifts occupy the flue for years, causing clay-tile spalling and blockages before the homeowner ever notices a problem.
- Third-degree creosote in “light use” chimneys. Roswell homeowners who burn only 20-40 fires per season often skip annual inspections, assuming infrequent use means low risk. But low-temperature smoldering fires - the kind started on wet 35°F nights when the homeowner is in a hurry - deposit sticky Stage 2 creosote that hardens into glazed third-degree buildup faster than high-heat burns. By the time there’s a performance problem, the liner may need chemical treatment or replacement.
- Destroyed mortar from humidity cycling. Roswell’s position in the Chattahoochee River valley produces persistently high winter humidity, and the local pattern of cycling between wet cold nights and mild afternoons destroys mortar joints and chimney crowns. The damage is often invisible from the ground until we run the camera or inspect the crown from the roof.
Pricing for Fireplace Services in Roswell, GA
We’re explicit about cost because “call for a quote” is how the industry hides bait-and-switch pricing. Here’s what fireplace services typically run in Roswell:
| Service | Typical Range in Roswell |
|---|---|
| Level 2 camera inspection with photo record | $195-$245 |
| Gas fireplace service and diagnostic | $195-$295 |
| Wood burning fireplace sweep and inspection | $245-$345 |
| Damper repair or replacement | $295-$485 |
| Firebox repair (refractory) | $450-$850 |
| Fireplace conversion (wood to gas) | $1,800-$3,200 |
| Fireplace insert with stainless liner | $2,800-$4,500 |
| Prefabricated fireplace replacement | $3,500-$6,500 |
What moves the needle within these ranges: accessibility (steep roof pitch, tight chase enclosure), creosote severity (third-degree glaze requires chemical treatment before mechanical removal), and whether the existing flue liner can be saved or needs replacement. We deliver a written price, written scope, and written warranty before any work starts - Haven Standard Clause 1, H.A.V.E.N. “Have it in writing.” No exceptions. Call (678) 535-2204 for your exact quote; estimates are free.
We Also Serve Cities Near Roswell
Our crews work throughout north metro Atlanta. If you’re in Alpharetta, Woodstock, Marietta, or Holly Springs, the same Level 2 camera inspection, written pricing, and documented photo record apply. We carry inventory for all these markets and can often schedule within a few days. Learn more about our coverage for Fireplace Services in Roswell and surrounding areas.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Roswell
No. Zero-clearance prefabricated fireplaces are engineered as complete factory-built systems with specific clearances to combustibles; they cannot be relined like masonry chimneys. When the heat exchanger cracks, the firebox warps, or the chase enclosure deteriorates, the entire unit must be replaced to manufacturer specifications. We verify this with camera inspection before recommending replacement, and we’ll show you exactly what failed. Call (678) 535-2204 for an exact quote - estimates are free.
Low-temperature smoldering fires - common on Roswell’s wet 35°F nights when homeowners are in a hurry - deposit sticky Stage 2 creosote faster than high-heat burns. Infrequent use also means you won’t notice performance degradation until the problem is advanced. Annual inspection catches first-degree creosote before it becomes third-degree glaze, and identifies moisture damage from the Chattahoochee-corridor humidity cycling that destroys mortar and crowns regardless of burn frequency. Call (678) 535-2204 for an exact quote - estimates are free.
First-degree creosote is sooty and brush-removable; third-degree is a hardened, glazed tar that requires chemical treatment or mechanical removal with chains or rotary tools, and sometimes indicates an unsafe liner that must be replaced. In Roswell, the humid climate and low-temperature burning pattern accelerate the progression from first to third degree. We distinguish the two with camera inspection - you see what we see - before recommending any treatment. Call (678) 535-2204 for an exact quote - estimates are free.
It doesn’t, and it shouldn’t. Gas log sets installed in the 1990s often left the original damper permanently open as an installer shortcut to avoid proper venting engineering. An open damper bleeds conditioned air year-round, lets moisture and animals enter, and is not required by any modern gas appliance code. We replace the open damper with a proper top-sealing or throat damper, verify the venting with a Level 2 inspection, and cap the flue to exclude moisture and chimney swifts. Call (678) 535-2204 for an exact quote - estimates are free.
Level 1 is a visual inspection of accessible portions - appropriate if you’ve maintained annual service with no changes. Level 2 adds camera-scan documentation of the full flue interior, required for real estate transactions, after chimney fires, or when changing appliance type - this is our default on every visit, Haven Standard Clause 4. Level 3 involves demolition of building materials to access concealed areas, reserved for suspected structural hazards. For virtually every Roswell homeowner we see, Level 2 is the right starting point. Call (678) 535-2204 for an exact quote - estimates are free.
A homeowner on Canton Street in the Historic District called us about a gas log set that wouldn’t stay lit in their 1900s home. We ran a Level 2 inspection with camera and found the original clay-tile flue liner had spalled from years of Chattahoochee-corridor moisture, with third-degree creosote glaze coating the smoke chamber - the 1990s gas conversion had left the damper permanently open and the flue uncapped. We installed a HeatShield liner, replaced the damper, added a cap, and the draft problem was solved. The photo record went into their file, and the written warranty went into their drawer. That’s how we work.
Ready to see what your chimney actually looks like? Call (678) 535-2204 to schedule a Level 2 camera inspection in Roswell. We’ll deliver a written price before any work starts, a documented photo record when it’s done, and the 365-Day Done Right Promise on every job. Live person answering, 24 hours a day.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Roswell and north metro Atlanta since 2009.